Our products at a glance:

It's a long way from raw materials through the mixture to the finished stone. Many plant components are involved in this process. Only if the system components are matched, can one be assured of a smooth process and economical operation of the block making plant. Learn about our Concrete block production plants.

It's a long way from raw materials over mixture to the finished (Kerb)stone. Masa Kerbstone presses were developed to fulfill among other criteria, the special requirements of the "British Standard" kerbstones. This "British Standard" is still a condition in countries of the Middle East and the UK. Learn about our Kerbstone production plants.

The manufacturing of autoclaved aerated concrete products demands high standards for mixing and dosing of the aggregates, the control of the fermentation process and the control of each production step. Masa's aerated concrete installations are proven advanced technology processes, designed according to customers specific requirements. This approach allows complete solutions to ensure highly efficient, optimised processes resulting in consistent final product quality. Learn more about our plants for the production of AAC.

It's a long way from raw materials through the mixture to the finished sand lime bricks. Many plant components are involved in this process. Only if the system components are matched, can one be assured of a smooth process and economical operation of the sand lime brick production plant. Learn about our Sand lime brick production plants.

The slab press UNI 2000 is the heart of any plant for the manufacture of concrete slabs. In addition, dosing and mixing plants, take-off devices with direct washing units and storage systems as well as machines and equipment for slab refinement and packaging are required. Masa can offer the complete know-how for the production of concrete slabs. This is the decisive advantage for our customers: Planning, design, manufacture, assembly, commissioning, training, maintenance and continuous support during production – all from one supplier. Learn about our Concrete slab production plants.

Masa LithoPore® is a mineral building material that is processed into a vapour-permeable thermal insulation panel. Learn more about Masa-LithoPore®

Our service:

Masa plants and machines are installed and commissioned by our own experienced fitters. Masa relies on qualified personnel, trained in Germany. Read more about the assembly and commissioning of your production line.

The Masa Lifetime service extends far beyond the actual assembly and commissioning of a plant. Masa can rely on specific know-how and an industry experience of more than 110 years. Find out more about the wide range of Masa Lifetime services.

Do you need support with your machine? Masa Support scores in both quality and significantly improved accessibility. Whether "first aid" for technical problems, updates, functional expansions of your production plant or technical questions, the know-how provided by Masa Support covers a wide range of services. Get information now.

One of the keys to increasing productivity and quality is continuous training of the machine and maintenance personnel.
The acquired know-how will pay off quickly: You and your employees only know how good a Masa machine or plant actually is, if all functions, tricks and fine adjustments are known. Learn more about Masa Customer training.

Are you looking for your contact? The Masa Service team introduces itself. All contact details can be found here.

Get more information about us:

Sand lime brick production

Purpose built,
using proven technology.

Learn more about our plants for the production of Sand lime bricks.

It's a long way from raw materials through the mixture to the finished sand lime bricks. Many plant components are involved in this process. Only if the system components are matched, can one be assured of a smooth process and economical operation of the sand lime brick production plant.

Do you want to learn more about the Masa sand lime brick manufacturing process? Inform yourself using the interactive step by step system, as to how a sand lime brick is produced from various raw materials.

Raw material storage, dosing, and mixing

Sand lime bricks consist of the two raw materials sand and lime only. For the manufacturing process, water is required in addition. The raw materials that are mostly supplied from local extraction places are stored separately in raw material silos. On the way to the silos, the sand passes a screening station to separate oversize material.

Masa sand lime brick making plants are designed to use at least two different types of sand. The advantage for the customers is that the product quality can directly be influenced by a specific mixture of the different types of sand.

The raw materials sand, lime, and water are exactly dosed and weighed in individual scales and fed into the intensive mixer. In the mixing process, a homogeneous and highly disperse sand lime compound is generated.

The complete automatic process is controlled and monitored via the Masa mixing plant control system .

Reactor and chemical reaction

By means of transport devices (e.g. belt conveyors and bucket conveyors), the sand lime compound is fed into the reactor . The number of reactors depends on the number of presses. Typically, one reactor per press is used. Advantage: With the help of the Masa mixing plant control system, each press is always supplied with an optimum sand lime compound, also in case of different products.

Inside the reactor, the lime is turned to calcium hydroxide by means of a chemical reaction that is triggered when water is added. This process is completed after approx. two hours, and processing of the sand lime compound can be continued in the press.

Masa double shaft mixer

Between the reactor and the press, there is a double shaft mixer. To provide the double shaft mixer and the press with constant quantities of sand lime compound, the reactor outlet is equipped with a special discharge system developed by Masa. With the help of the Masa press control system, the quantity of the sand lime compound is adapted to the manufacturing process.

For an optimum moisture content for pressing, an automatic dosing device adds water to the double shaft mixer. All give-over points are particularly tight to avoid the development of dust.

Hydraulic sand lime brick press Masa HDP

The heart of a sand lime brick making plant undoubtedly is the Masa press, eg. type HDP 800. Masa can offer different press types for different capacity requirements.

In fully automatic hydraulic presses, the sand lime compound is pressed to bricks. The Masa press control system provides for a uniform compaction of the sand lime compound until the required final height and density of the products is reached.

Different moulding tools enable the manufacture of different brick sizes. Depending on the type of tool, it is possible to manufacture perforated or solid bricks with or without tongue and groove or holes for handling or chamfers.

A brick placing automat takes the fresh bricks from the press and smoothly places them on a hardening car. The Masa press control system enables a precise and space-saving loading of the hardening cars so as to make an optimum use of the autoclave capacity.

Would you like to manufacture colored sand lime bricks? More

Hardening car transport from the press to the autoclaves

When the hardening car has been loaded completely, it is moved to a transport platform via a rail track system. Depending on the factory capacity, up to 8 hardening cars can be moved so that loading and unloading of the autoclaves can be carried out quickly.

Autoclaves/steam boiler

The sand lime bricks receive their final strength by means of hardening under steam pressure in special, sealed pressure vessels, the autoclaves.

The steam pressure is approx. 12 bar, the temperature approx. 192° C.

The hardening procedure is precisely defined. The hardening time depends on the density and size of the sand lime bricks. Usually, it is between 4 and 8 hours.

The various autoclaving steps can individually be determined in the Masa autoclave control system . The complete hardening process runs off automatically and is continuously recorded.

The steam for the hardening process in the autoclaves is generated in a steam boiler plant. Usually, high-capacity steam boilers that are operated with gas or oil are used for the steam generation.


When the hardening process has been completed, the sand lime bricks are ready for use.

From the transport platform, the hardened sand lime bricks are transported to the packaging plant on the hardening cars via a rail track system. To guarantee a fast discharge of the autoclaves, a complete autoclave filling can be stored intermediately in front of the packaging plant.

The Masa cuber takes the sand lime bricks off the hardening car and places them on transport pallets.

Masa recommend to package the finished products in that way that they are protected from dirt and moisture before they are removed from the factory. Depending on the plant concept, this packaging process can be carried out automatically or semi-automatically.

For a safe transport and storage of the filled transport pallets, these have to be bundled, preferably with plastic straps.

Other individual packaging concepts, e.g. with stretch film or shrink-wrapping plants, can be integrated into the packaging line as per customer requirements.

Cleaning of the hardening cars

As soon as the Masa cuber has taken the hardened sand lime bricks off the hardening cars, the latter are cleaned. The cleaning device consists of a rotating brush and an oscillating scraper.

The empty car platform returns the cleaned hardening cars to the sand lime brick presses where they can be loaded with fresh bricks again.

Current brochures

Did we catch your interest? Contact us and send your request.